BENSHAW ENHANCED KEYPAD Bedienungsanleitung PDF herunterladen (Seite 116)

108

VmetStatus I/O40

ImetStatus I/O41

I/O: Vmet Status

40 0.00%

I/O: Imet Status

41 0.00%

7 - PARAMETER DESCRIPTION

LCD Display

Range 0% to 100.0% (view only)

Description This parameter contains a value representing the measured voltage at the Vmet (voltage output) terminal as

a percentage of the maximum output voltage. For example, if this parameter showed 50%, then the voltage

being output at Vmet would be 5VDC (50% of 10VDC, the maximum value).

See also I/O 33 on page 104.

DOP Scaling I/O 42

I/O: DOP Scaling

42 6FS

LCD Display

Range 6 or 48 times the output frequency (6FS or 48FS) (Default 6FS)

Description This parameter selects the multiplier that is used to determine the output frequency at the DOP (Pulse

Train Output) terminal. The pulse train is a 50% duty cycle signal and requires a pull-up resistor of

approximately 4.7k Ohms.

See also DRV 05, 07 on page 78 and “Description of Control Terminals” on page 41.

1 2 ... 111 112 113 114 115 116 117 118 119 120 121 ... 181 182

Keine Kommentare

BENSHAW ENHANCED KEYPAD Bedienungsanleitung Seite 116